Durabond Floor Covering Installation System provides a wide range of products suited for quality installations of almost all types of floor covering.

All of the Durabond Floor Covering products listed meet the criteria for USGBC EQ Credit 4.1, MR Credit 5.1and 5.2 and/or the criteria for NAHBs Model Green Home Guidelines.

D-1500™ Universal Flooring Adhesive is a premium, firm-set/medium grab, water-based, acrylic adhesive for bonding rubber, vinyl, carpet, felt-backed linoleum, and cork floor coverings, as well as rubber and vinyl stair treads, over properly prepared concrete, cement board, or plywood subfloors.
D-1500 is formulated using special acrylic polymer emulsions and tackifiers that enable a choice of installation options, including “wet-set” or “pressure sensitive” techniques.  D-1500 displays tenacious early bond strength, is specially formulated to be highly resistant to plasticizer migration from vinyl, and will not show migration staining. D-1500 contains Bostik’s Blockade™ antimicrobial protection, which inhibits the growth of bacteria, mold or mildew on the surface of the dried adhesive; the dried adhesive resists stains caused by mold and mildew.

D-1400 Epoxy Adhesive is a premium, solvent-free, firm-set / slow grab, epoxy adhesive for bonding rubber tile and sheet goods, luxury solid vinyl tile, vinyl composition tile (VCT), homogenous sheet vinyl, felt-backed commercial sheet, and rubber/vinyl stair treads, in extremely demanding operating environments including wet, heavy static, or rolling load applications.This is a rapid curing formulation that permits foot traffic in just six hours, making it ideal for installations where minimal down time is essential.

D-1372 Pressure Sensitive Spray Adhesive Shake well before using. Clean object or surface thoroughly. Point valve toward surface and spray from a distance of 8 to 12 inches, keeping the can moving to avoid a buildup on the surface. Let adhesive dry to a tack before bonding together. For a permanent bond, spray both surfaces, allow to tack, then bond. For a temporary or repositionable bond, spray one surface, allow to tack then apply.

DURABOND® D-990™ Firm-Set Multipurpose Latex Adhesive has excellent wet suction and extended tack time for pattern matching and seam adjustments. D-990 may be used for extended wear interior installations of most types of carpet backings and felt backed sheet goods. Use D-990 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring.

DURABOND® D-920™ Premium Multipurpose Floor Covering Adhesive is a fast grab, firm-set latex adhesive with excellent wet suction (ideal for “wet set” installations) for heavy to extreme duty interior installations of most types of carpet backings and felt backed sheet goods. Use D-920 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring.

DURABOND® D-910 is a fast grab, multipurpose latex adhesive with excellent wet suction for heavy-duty interior installations of most types of carpet backings and felt backed sheet goods. Use D-910 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring.

DURABOND® D-905 is a fast grab, multipurpose latex adhesive for light to heavy-duty interior installations of most types of carpet backings and felt backed sheet goods. Use D-905 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring.

DURABOND® D-870™ Carpet Tile and Pad Adhesive is a soft set, low odor, latex based adhesive for installing carpet squares and carpet pad over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and properly prepared, well bonded, VCT flooring. D-870 dries fast and offers a long open time for tile positioning and adjustment.

DURABOND® D-860 Double Stick Adhesive is a flexible, soft set, latex adhesive with excellent re-tack for heavy to extreme duty interior installations of most types of carpet and pad; long open time allows for accurate pattern matching. Use D-860 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and properly prepared well bonded VCT flooring.

DURABOND® D-850™ Carpet Adhesive is a fast grab carpet adhesive for use in commercial and residential installations of most types of carpet backings. Use D-850 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring.

DURABOND® D-819™ Tack Strip & Multi-Use Adhesive is a fast-setting, firm set, high quality moisture cure urethane adhesive with excellent adhesion to concrete, patches, wood, plywood, metal, metal stair nosing, and many other properly prepared surfaces. D-819 cures by reacting with moisture to form a tough, rigid adhesive that is tenacious and waterproof. D-819 is recommended for installing tack strip to properly prepared substrates above, on, or below grade; metal stair nosing; or a sub-floor adhesive.

DURABOND® D-818™ Tack Strip & Multi-Use Adhesive is a fast-setting high quality moisture cure urethane adhesive with excellent adhesion to concrete, patches, wood, plywood, metal, metal stair nosing, and many other properly prepared surfaces. D-818 cures by reacting with moisture to form a tough, flexible adhesive that is tenacious and waterproof. D-818 is recommended for installing tack strip to properly prepared substrates above, on, or below grade; metal stair nosing; or as use as a flexible sub-floor adhesive.

DURABOND® D-817™ Fast Grab Carpet Pad Adhesive is a water-based latex adhesive designed to bond carpet pad to approved subfloors prior to stretch-in installation of carpet. Use D-817 Fast Grab Carpet Pad Adhesive over structurally sound dry concrete (on, above, or below grade) and APA underlayment grade plywood.

DURABOND® D-807™ Spray Adhesive is a low odor, water-based, sprayable adhesive for installations involving direct glue down and double stick carpet & pad. Use D-807 over structurally sound dry concrete (on, above, or below grade) or APA underlayment grade plywood. D-807 contains Bostik’s Blockade™, antimicrobial technology that provides built in protection to inhibit the growth of a broad range of odor causing bacteria, mold and mildew on the surface of the coating’s film.

DURABOND® D-745™ Fire Retardant, Wall Adhesive is a high performance, fast grab, firm set, low-VOC, acrylic, adhesive designed for bonding wall carpet where a Class "A" rating for both flame spread and smoke development is required by the following test standards; ASTM E 84, NFPA No. 255 and UL No. 723.

DURABOND® D-740™Multipurpose Wall Adhesive is a high performance, firm set, acrylic adhesive designed for use on rubber and vinyl cove base, FRP panel, and wall carpet. D-740 may be used over dry substrate surfaces including: drywall, latex painted surfaces, concrete, brick, wood and particle board. The initial wet suction of D-740 is strong enough to hold tight corners of all types of cove base and is ideal for difficult installations pertaining to cove base, FRP panels, and wall carpet. D-740 is a low VOC formulation and meets the toughest air quality restrictions, including SCAQMD1168.

DURABOND® D-670 Firm Set Sheet Goods Adhesive is a latex adhesive with good slip time for pattern and seam matching of felt backed sheet goods for light to heavy-duty commercial installations. Use D-670 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and well bonded VCT and resilient flooring.

DURABOND® D-650™ Clear VCT Adhesive is a low odor, latex based, clear thin spread adhesive with long working time and high residual tack for all types of Vinyl Composite Tile (VCT). Use D-650 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and properly prepared well bonded VCT flooring.

DURABOND® D-640 Pure Vinyl Adhesive is a low odor, latex based adhesive suitable for full spread installations of Pure Vinyl Sheet Flooring, Solid Vinyl Tile, carpet backed with solid vinyl, and for installing perimeter bonded vinyl sheet goods. D-640 offers good slip time for pattern matching and seam adjustments. Use D-640 over structurally sound dry concrete (on, above, or below grade), APA underlayment grade plywood, and properly prepared well bonded VCT/tile and resilient flooring.

D-261™ Extreme Moisture Vapor Barrier Coating is a two-component, penetrating epoxy formulated to incorporate Bostik’s Blockade™ antimicrobial protection and dramatically reduce moisture vapor transmission from substrates including; “freshly-poured/green concrete”, properly prepared concrete, cement backer board, cement patch/underlayments, radiant heat flooring, and cement-based terrazzo prior to the installation of carpet; vinyl/VCT; engineered or solid hardwood; porcelain, marble, granite, or ceramic tile floor covering.

DURABOND® D-250™ Moisture Vapor Barrier Coating is a two-component, water-based, penetrating epoxy formulated to incorporate antimicrobial protection and dramatically reduce moisture vapor transmission from substrates including; “freshly-poured/green concrete”, properly prepared concrete, cement backer board, cement patch/underlayments, radiant heat flooring, and cement  based terrazzo prior to the installation of carpet; vinyl/VCT; engineered or solid hardwood; porcelain, marble, granite, or ceramic tile floor covering.

Universal Primer is designed for use with Durabond 80P and 83P Underlayments and all Bostik Self Leveling Underlayments. Use Universal Primer over concrete, approved plywood substrates; cement backer board, existing ceramic tile, marble, granite, and terrazzo or cut back adhesive residues.

Durabond® D-L16™ High Strength Additive is a high solids acrylic emulsion designed to improve the performance of Durabond unmodified mortars such as D-5TM and D-2TM, as well as Durabond Fortified Tile Grouts (sanded and unsanded).

DURABOND® D-808™ Exterior Carpet Adhesive is a high performance, non-flammable, fast grab, firm set, low-VOC adhesive designed for bonding most outdoor carpets. D-808 may be used over clean, dry exterior surfaces including: fully cured cement, seasoned asphalt, terrazzo and exterior/marine-grade plywood. D-808 is a low-VOC formulation that meets the toughest air quality restrictions, including SCAQMD1168 and CRI Green Label Plus.